![background image](http://html1.mh-extra.com/html/barco/medea-series/medea-series_installation-manual_4187181068.webp)
R5906141 /02
Medea series
68
8.1 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces follow the
cleaning procedure as described here precisely.
Required tools
•
Compressed air.
•
Clean Toraysee® cloth or any micro fiber lens cleaning cloth.
•
Clean cotton cloth.
Required parts
Lens cleaner (e.g. Carl Zeiss lens cleaner or Purasol® or any water-based lens cleaner)
How to clean the lens?
1.
Blow off dust with clean compressed air (or pressurized air cans
1
) .
2.
Clean with lens cleaner together with a clean lens cleaning cloth to remove the dust and contamination. Use
big wipes in one single direction.
Warning:
Do not wipe back and forwards across the lens surface as this tends to grind dirt into the
coating.
3.
Use a dry lens cleaning cloth to remove left liquid or stripes. Polish with small circles.
4.
If there are still fingerprints on the surface, wipe them off with lens cleaner together with a clean lens cleaning
cloth. Polish again with a dry one.
If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty
cloth.
8.2 Cleaning the exterior of the projector
How to clean the exterior of the projector ?
1.
Switch off the projector and unplug the projector from the mains power net.
2.
Clean the housing of the projector with a damp cloth. Stubborn stains may be removed with a cloth lightly
dampened with a mild detergent solution.
8.3 Filters
General info regarding Air intake and filters.
The Medea is shipped without any filters. The air intake is just protected by a mesh. This mesh has to be
vacuum cleaned occasionally when needed. There is no specific interval for this operation.
1:
Pressurized air cans are not efficient if there is too much dust on the surface, the pressure is too low
Summary of Contents for Medea series
Page 1: ...ENABLING BRIGHT OUTCOMES Installation Manual Medea series...
Page 18: ...R5906141 02 Medea series 18 Safety...
Page 29: ...29 Overview Installation process projector R5906141 02 Medea series Installation process 3...
Page 56: ...R5906141 02 Medea series 56 Input Communication...