![background image](http://html.mh-extra.com/html/barco/mdsc-8532/mdsc-8532_user-manual_473712018.webp)
R5914105 /01 MDSC-8532
18
2.5 VESA mount installation
To install the display on a VESA mounting solution
The display can be attached to a VESA 100 mm arm or stand.
Image 2–8
The VESA mounting holes at the back of the display are provided with M4-type blind fasteners to fix the VESA
mounting plate. Depending on the VESA plate thickness (T) and the thickness of possible washers (W), a
different screw length (L) should be selected.
Please respect the following rule to select an appropriate screw length:
•
L
min
= T + W + 16 mm
•
L
max
= T + W + 19 mm
T
W
L
min
L
max
Image 2–9
CAUTION:
Use an arm that is in compliance with VESA requirements.
CAUTION:
The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor (IEC60601–1).
Summary of Contents for MDSC-8532
