Barco MDSC-8532, User Manual

Page: 16 / 64

R5914105 /01 MDSC-8532 16
3 2 1 5 4 6
Image 2–3
DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 with a length of up to 3 m are
recommended.
Premium certified HDMI 2.0 cables with a length of up to 3 m are recommended.
Use 3G-SDI Belden 1694A cables with a length of up to 50 m.
The video output must be enabled in the OSD menu (see “Video out”, page 38 ).
A subset of the commands of the remote control protocol is also available on a new DDC protocol
on DVI and DisplayPort1 auxiliary channel.
2.3 Power supply connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +25 VDC power input of your display.
2. Plug the other end of the external DC power supply into a
grounded power outlet by means of the proper
power cord delivered in the packaging.
Image 2–4
CAUTION: To avoid risk of electric shock, the external DC power supply must be connected to a
mains with protective earth. The ground connection on the display’s DC power input connector has
no protective earth function. The MDSC-8532 display protective earth connection is provided via a
dedicate pin (see next steps).
Display installation