Barco MDSC-8231, User Manual

Page: 56 / 64

R5911692 /01 MDSC-8231 56
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the MDSC-8231 as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
4
W
Separation distance according to frequency of transmitter
150kHz to 80MHz
d=1.2
√ P
80MHz to 800MHz
d=1.2
√ P
800MHz to 2.5GHz
d=2.3
√ P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection form structures, object and people.
7.7 Explanation of symbols
Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
Indicates the device meets the requirements of the applicable EC directives/
regulations.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B).
E346057
Indicates the device is approved according to the UL Recognition regulations.
E346057
MEDICAL – GENERAL MEDICAL EQUIPMENT
AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA CAN/CSA-C22.2
NO. 60601-1:14
E346057
Indicates the device is approved according to the UL regulations for Canada and US.
Indicates the device is approved according to the UL Demko regulations.
Indicates the device is approved according to the CCC regulations.
Important information
4: For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.