Barco MDSC-8231, User Manual

Page: 35 / 64

R5911692 /01 MDSC-8231 35
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the Main Source submenu.
4. Select one of the available main sources and confirm.
5.3.2 DisplayPort mode
About DisplayPort mode
The available DisplayPort (DP) modes for your display are:
• DP 1.2 MST L:R (MST stream 1 on Left side/ MST stream 2 on Right side)
• DP 1.2 MST R:L (MST stream 1 on Right side/ MST stream 2 on Left side)
• DP 1.1 main
• DP 1.1 dual
Please refer to the technical specifications for an overview of accepted video formats.
To select the DisplayPort mode
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the DP mode submenu.
4. Select one of the available DisplayPort modes and confirm.
5.3.3 4K SDI mode
About 4K SDI mode
The available 4K SDI modes for your display are:
• Square-division (SQD)
• 2-sample interleave (2SI)
• Auto (*)
(*) Select Auto only when the SDI mode is present in the SDI video stream.
To select the 4K SDI mode
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the 4K SDI mode submenu.
4. Select one of the available 4K SDI modes and confirm.
5.3.4 SDI config
About SDI config
The available SDI config modes for your display are:
• Quad-SDI (Quad link 3G-SDI)
• Dual SDI (Dual input: SDI 1 up to 12G-SDI, SDI 3 up to 3G-SDI)
• Single SDI-1 (up to 12G-SDI)
• Single SDI-3 (up to 12G-SDI)
To select the SDI config mode
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
Advanced operation