Barco MDSC-2326 MNAH, User Manual, Page: 46 / 78

K5902135 (451920612565) /04 MDSC-2326
46
To manually adjust the phase
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Phase submenu.
The command bar Phase is highlighted.
4. Set the phase as desired and confirm.
5.2.7 Clock/Line
This menu item is only available when VGA input is connected.
About clock/line
If the result of the Auto Adjustment procedure described above isn ’ t satisfactory, the Clock/Line can be
manually adjusted by following this procedure.
To manually adjust the phase
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Clock/Line submenu.
The command bar Clock/Line is highlighted.
4. Set the clock/line as desired and confirm.
5.3 Display Format menu
5.3.1 Main Source (Primary Source)
About main sources
The available main sources for your display are:
• Auto Search
• Composite
• S-Video
• Component
• PC Analog
• DVI 1
• DVI 2
• SDI 1
• SDI 2
• Nexxis
• DisplayPort
Available main sources dependent on display model.
The main source can also be selected through a shortkey function or via the extended keyboard
functionality.
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Main Source submenu.
4. Select one of the available main source and confirm.
Advanced operation