Barco MDSC-2326 MNAH, User Manual, Page: 45 / 78

K5902135 (451920612565) /04 MDSC-2326
45
• Surgical 1 (low latency, optimized for fast moving images)
About latency
The video latency is defined as the delay between the monitor input video level transition time to the
corresponding light output transition on the screen top-left corner.
The maximum latency in Surgical mode is less than 1 Video Frame period for all the monitor electrical inputs
while in Diagnostic mode the latency is between 1 to 2 Video Frame periods excluding S-Video, CVBS analog
and SFP optical (MNA(H) versions) inputs which have an additional delay of maximum 1 Video Frame period.
To select a Smart Video preset
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Smart Video submenu.
4. Select one of the available Smart Video presets and confirm.
5.2.4 Image Position
This menu item is only available when VGA input is connected.
To adjust the image position
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Image Position submenu.
A small OSD menu will be activated indicating the horizontal and vertical image position offset.
4. Use the and keys to move the picture up and down.
5. Use the and keys to move the picture left and right.
6. When finished, use the key to exit from the small OSD menu.
5.2.5 Auto Adjustment
This menu item is only available when VGA input is connected.
About auto adjustment
When auto adjustment is activated, the phase and clock per line parameters are automatically adjusted.
To activate auto adjustment
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Auto Adjustment submenu.
The automatic picture adjustment is activated: the phase and clock per line parameters are automatically
adjusted.
5.2.6 Phase
This menu item is only available when VGA input is connected.
About phase
If the result of the Auto Adjustment procedure described above isn ’ t satisfactory, the Phase can be manually
adjusted by following this procedure.
Advanced operation