Barco MDSC-2232 Series, User Manual

Page: 22 / 76

K5902105 (451920611795) /04 MDSC-2232
22
3.1 Cover removal
To remove the connector compartment cover
Slide the connector compartment cover downwards to get access to the connectors.
Image 3-1
3.2 Interface connection
About the interfaces
The MDSC-2232 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See the
dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side (SbS)
functionality becomes available, allowing you to view two different video inputs at once. Please refer to the
dedicated chapter for more info on how to activate and use the PiP and SbS features on your MDSC-2232.
Beside the video input connections, the MDSC-2232 also has video output capabilities allowing you to loop-
through certain video inputs connected with the MDSC-2232 to another display, projector, video recorder, ...
This chapter describes how to connect the different video interface types to the MDSC-2232.
3.2.1 MDSC-2232 DDI version
To connect the interfaces
1. Connect one or more video source(s) to the corresponding video inputs of the display.
• DVI or VGA:
1
and/or
6
PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA
adapter. The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable
cover.
• DisplayPort:
7
• SDI:
2
and/or
3
• R/G/B/S:
8
/
9
/
10
/
4
• R/G/B (SOG):
8
/
9
/
10
• Y/Pb/Pr:
9
/
10
/
8
• CVBS:
5
• S-Video:
11
Display installation