Barco MDPC-8127, User Manual, Page: 35 / 52

35 R5913216 /03 MDPC-8127
3. Enter the Image Source Selection submenu.
4. Select one of the available image sources and confirm.
4.19 Grayscale conversion modes
About grayscale conversion modes
Grayscale conversion modes specify how color generated on the display controller is converted to grayscale
in your display.
The available grayscale conversion modes are:
• No conversion
• Use Red Channel: This mode is intended for grayscale displays where gray is sent over the red channel.
• Use Green Channel: This mode is intended for grayscale displays where gray is sent over the green
channel.
• Use Blue Channel: This mode is intended for grayscale displays where gray is sent over the blue channel.
To manually select a grayscale conversion mode:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3. Enter the Grayscale Conversion submenu.
4. Select one of the available color conversion modes and confirm.
4.20 DisplayPort standard version
About DisplayPort standard version
The MDPC-8127 supports 2 DisplayPort standard versions: DP V1.1 and DP V1.2, the latter providing a
higher video bandwidth.
To select the DisplayPort standard version
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3. Enter the Input Interface Standard Version submenu.
4. Select one of the available versions and confirm.
To obtain full resolution and full refresh rate, DP V1.2 should be selected and two DisplayPort video
input cables must be connected to the display.
4.21 EDID timings
About EDID timings
Following EDID timings are available for your MDPC-8127:
• Resolution : Allows to manually modify the resolution of the image source video input signal.
• Refresh Rate : Allows to manually select the refresh rate of the image source video input signal depending
on the maximum refresh rate of the display controller connected to your display.
• Color Depth : Allows to change the color depth to 8 or to 10 bit.
Advanced operation