Barco MDPC-8127, User Manual, Page: 16 / 52

R5913216 /03 MDPC-8127 16
3. Connect the USB upstream connector with the USB host of your workstation to make use of QAWeb
Enterprise and to use the Barco Touchpad optimally.
4. Connect the Barco Touchpad with one of the USB downstream connectors. Other peripherals like a
keyboard, mouse, etc. can also be connected.
5. Connect the supplied mains cable to the power input of the display.
Image 2 – 5
6. Route all cables through the cable clips in the connector compartment.
7. Re-install the connector cover: slide the top of the cover in the available recesses, then push the bottom of
the cover back into position.
8. Route some or all cables through the routing channels in the stand of your display.
9. Connect the supplied mains cable to a
grounded power outlet.
2.4 MXRT driver and Intuitive Workflow Tools
installation
About
When you are using a Barco MXRT display controller, you can start up your MDPC-8127 display system and
install the
MXRT driver and Intuitive Workflow Tools . Barco ’ s Intuitive Workflow Tools are designed to
increase visibility of subtle details, improve focus during reading sessions, and accelerate workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your MDPC-8127 as described in “ Standby switching ” , page 22 .
2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
3. Download the latest MXRT driver and Intuitive Workflow Tools from www.barco.com/mxrt.
4. Install the MXRT driver and Barco ’ s Intuitive Workflow Tools as described in the Barco “ Display
Controller and Intuitive Workflow Tools ” user guide on the included documentation CD, or at
www.barco.com/support .
5. When the drivers are completely installed, your display will automatically detect the connected video input
signal(s) and apply the correct video mode and refresh rate.
2.5 QAWeb Enterprise registration
About
QAWeb Enterprise helps you manage quality and assure compliance of your expanding healthcare
enterprise with less effort, lower cost, and complete confidence. This fully automated and secure system
guarantees a consistent image quality and uptime for all registered imaging display systems within your facility
and across your enterprise. Learn more at
www.barco.com/qaweb .
Installation and setup