Barco MDPC-8127, User Manual, Page: 14 / 52

R5913216 /03 MDPC-8127 14
2.1 Display controller installation
About
Before you install your display and connect it with the workstation, make sure to have a suitable 2 display
controller installed in the workstation.
The MDPC-8127 display operates at its full specifications when driven by a Barco MXRT display
controller and MXRT driver (which also includes the Barco Intuitive Workflow Tools ). If you
ordered a MXRT display controller, it is included in the box of your display.
For more information and installation instructions, please check the Barco
“ Display Controller and
Intuitive Workflow Tools ” user guide on the included documentation CD, or at
www.barco.com/support .
2.2 Display position adjustment
To adjust the display position
After unpacking, you can safely tilt and swivel the display to your preferred position.
Image 2 – 1
To adjust the height of the display, first move the slider at the back of the stand to the unlock position. Then
you can raise or lower the display as desired.
Installation and setup
2. For a list of compatible display controllers, please refer to the compatibility matrix available on my.barco.com (MyBarco > My Support
> Healthcare > Compatibility Matrices > Barco Systems Compatibility Matrices)