![background image](http://html1.mh-extra.com/html/barco/mdng-3220/mdng-3220_user-manual_4045767011.webp)
3. Display installation
3. DISPLAY INSTALLATION
Prior to installing your NIO 3MP LED Display and connecting all necessary cables, make
sure to have a suitable display controller physically installed in your computer. If you
are using a Barco display controller, please consult the user guide delivered with it to
do this.
3.1
Unlocking the height mechanism
To remove the clip:
1. Position the display with its rear side facing you.
2. Pull the red clip out of the
fi
xation hole in the foot.
3. Keep the clip in the dedicated hole in case the display needs to be shipped later.
3.2
Adjusting the display position
To adjust the display position
1. Stand at the front side of the panel and take the panel at both sides.
2. Very important: Tilt the panel upwards before changing the orientation.
3. To change from portrait to landscape, turn the panel counterclockwise.
4. To change from landscape to portrait, turn clockwise.
K5903503 NIO 3MP LED DISPLAY 15/10/2014
9
Summary of Contents for MDNG-3220
