Barco MDMX-MNA, User Manual, Page: 16 / 40

R5913897 /00 MDMX-MNA 16
3.1 On switching
Switching on the console and external PC
1. Press the power button for console to start up the console.
The LED light of the power button for console turns blue when the power is on.
2. Press the power button for external PC to start up the PC.
The LED light of the power button for external PC turns green when the PC is on.
The device is ready for operation when the displays appear as video-routing-points in the Nexxis
systems.
3.2 Off switching
Switching off the console and external PC
• Press the power button for console to switch off the console and to disconnect it from the supply voltage.
The LED light of the power button for console turns off when the power is off. This does not switch off the
external PC.
• Press the power button for external PC to switch off the external PC (if connected).
The LED light of the power button for external PC turns off.
3.3 Stopwatch (MDMX-22400 and MDMX-22449)
Using the stopwatch
The stopwatch status is displayed on the SmartBar and via LED lights.
1. Press the Start/Resume button to start the stopwatch.
The LED light of the Start/Resume button turns on.
2. Press the Pause/Reset button to pause the stopwatch.
The LED light of the Pause/Reset button turns on and the LED light of the Start/Resume button turns off.
3. Press the Start/Resume button to resume the stopwatch.
The LED light of the Start/Resume button turns on and the LED light of the Pause/Reset button turns off.
Reset the stopwatch
• Press the Pause/Reset button to reset the stopwatch (00:00:00).
The LED lights turn off.
3.4 DICOM (PACS images optimization)
Overview
1. Press the DICOM button to activate the calibrated grayscale profile for PACS images.
The LED light turns on when DICOM is enabled.
2. Press the DICOM button again to deactivate the calibrated grayscale profile for PACS images.
The LED light turns off when DICOM is disabled.
Daily operation