Barco MDFC-8232 3SW, User Manual

Page: 34 / 70

R5913170 /00 MDFC-8232 34
5.2.5 Image Flip
About image flip
This function allows you to flip the image on your display.
The available options are:
• Disabled (no image flip applied)
• Mirror (flips the image horizontally, making the left content appear on the right and vice versa)
• Rotation (rotates the image 180°)
When image rotation is selected, the latency will increase with 20 msec. Image mirroring does not
cause any latency increase.
To enable/disable horizontal flip
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced menu.
3. Enter the Image Flip submenu.
4. Select one of the available options and confirm.
5.2.6 Screen resolution
About screen resolution
This function allows you to adjust the image resolution of the preferred timing detailed in the EDID exposed to
the DP input.
The available options are:
• 4K (17:9): for an image resolution of 4096 x 2160
• UHD (16:9): for an image resolution of 3840 x 2160
Image resolution of the preferred timing detailed in the EDID exposed to HDMI-1 and HDMI-2 are
predefined as follows: HDMI-1: 16:9; HDMI-2: 3D Full side by side (3840 x 1080).
To enable/disable horizontal flip
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced menu.
3. Enter the Screen Resolution submenu.
4. Select one of the available options and confirm.
5.3 Input select menu
5.3.1 Main source
About main sources
The available main sources for your display are:
• DVI
• SDI 4K (MDFC-8232 3SB/3SW version only)
• SDI (MDFC-8232 3SB/3SW version only)
• DisplayPort
• HDMI-1 (MDFC-8232 3HB/3HW version only)
• HDMI-2 (MDFC-8232 3HB/3HW version only)
The main source can also be quickly selected through the Input selection key ( ), without the need
to navigate through the OSD menu.
Advanced operation