6. Repackaging instructions
3
Foot protection buffer
8
Accessory box buffer
4
Right protection buffer
9
Accessory box (Power supply,
cables)
5
Display
10
Display controller box
6.1
Replacing the protection buffer
How to replace the protection buffer
1. Place the display on a stable surface.
2. Put the display in the lowest position and fasten the height mechanism, see "Unlocking the height mech-
3. Very important: Tilt the panel away from the foot before changing the orientation.
4. Turn the panel counterclockwise to put the panel in landscape orientation, see "Adjusting the display
5. Place the connector compartment cover in the protection buffer.
6. Slide the protection buffer over the foot of the display.
7. Tilt the panel back to the foot.
Image 6-2
Placing the protection buffer.
34
K5902074 CORONIS 5MP LED DISPLAY 19/12/2014
