Barco MDCC-4330 User Manual Download Page 51

Page: 51 / 60

K5902108 /06

Coronis Fusion 4MP / 6MP

7.5 Explanation of symbols

Symbols on the device

On the device or power supply, you may find the following symbols (nonrestrictive list):

Indicates compliance with Part 15 of the FCC rules (Class A or Class B)

Indicates the device is approved according to the UL regulations

Indicates the device is approved according to the UL regulations for Canada and US

E352529

Indicates the device is approved according to the UL regulations for Canada and US

Indicates the device is approved according to the UL Demko regulations

S&E

Indicates the device is approved according to the CCC regulations

Indicates the device is approved according to the VCCI regulations

Indicates the device is approved according to the KC regulations

Indicates the device is approved according to the BSMI regulations

Indicates the device is approved according to the PSE regulations

Indicates the device is approved according to the EAC regulations

Caution: Federal law (United Stated of America) restricts this device to sale by or on
the order of a licensed healthcare practitioner.

Indicates the USB connectors on the device

Indicates the DisplayPort connectors on the device

Important information

Summary of Contents for MDCC-4330





























































Search results

Summary of Contents for MDCC-4330

Reviews:

Related manuals for MDCC-4330

Brands by name

Popular brands

Barco MDCC-4330, User Manual

Search results

Summary of Contents for MDCC-4330

Reviews:

Related manuals for MDCC-4330

Brands by name

Popular brands