Barco MCM-400 HFR User Manual Download

Page: 89 / 214

8. OSD Preferences

8.2

Navigating through the OSD

How to navigate through the OSD?

1. Make sure the RCU address has been set to the same unique IR address of the projector or to its common RC5 address.

2. On the RCU, use the arrows

▲

▼

◄

and

►

to navigate through the menu items: a highlighted menu item indicates the actual

position.

Note:

The same rules apply when navigating within a dialog box!

Scrolling through the menu bar or through the drop down menus or through a list is a cycle, which means
that after the last item has been selected, the next selected item will be the

rst item again.

R5909056 MCM-400 HFR 11/05/2016

Summary of Contents for MCM-400 HFR























































































































































































































Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands

Barco MCM-400 HFR, User Manual

Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands