Barco MCM-400 HFR, User Manual

Page: 72 / 214

7. Getting started
7.3.3 Viewing Window fi le information
Description
You can view details about the currently selected Window fi le in the Window information dialog.
• Window properties fi eld: information about the window;
• Source properties fi eld: details about the sources used in the selected layout;
• Source sync phase: indication of the phase of the sources in the selected layout. The slider of the lock source is in the center
position of the slider bar. If all sources are locked externally – as they should be – their sliders will also be positioned in the
center of the respective slider bars. Only if a source is not in sync with the lock source, the corresponding slider is drifting on
its slider bar, indicating an external sync problem to be solved, since it results in image artifacts.
How to view Window fi le information?
1. In the OSD, navigate to Window fi les > Information... and press ENTER to select.
Image 7-10
2. You can view the information about the Window fi le that is currently active.
Image 7-11
68 R5909056 MCM-400 HFR 11/05/2016