Barco MCM-400 HFR User Manual Download

Page: 108 / 214

9. Advanced operation

9.1.7

Moving an anchor point in small steps

Description

Adjust mode

is used to do small geometry adjustments using the arrow keys on the RCU. Each step is only 1/32 of a pixel. For

larger adjustments the

Adjust mode

is not the ideal method. In that case the use of the

Edit mode

and

Change mode

is advised.

The steps below explain the procedure to adjust the anchor point on (row 0, column 0) along the X axis in 2x2 mode.

Using the arrow keys to move an anchor point

1. After selecting the anchor point in

Select mode

, press

ENTER

to switch to

Adjust Mode

Image 9-15

2. Press

◄

and

►

a multiple times or keep the arrow pressed to move the anchor point along the X-axis.

Also notice the impact of moving a top level anchor point in the example below.

Image 9-16
Adjusting the PixelsX and PixelsY positions

3. Press

▲

and

▼

a multiple times or keep the arrow pressed to move the anchor point along the Y-axis.

104

R5909056 MCM-400 HFR 11/05/2016

Summary of Contents for MCM-400 HFR























































































































































































































Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands

Barco MCM-400 HFR, User Manual

Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands