Barco Loki Installation Manual Download Page 45

Page: 45 / 128

601

–

0445 /05

Loki

ECO

READY

50%

Image 4-1

Projector mains powered

Auto transition after x minutes if ECO mode enables

Press power On/Off button, remote On/Off button

4.4.2 Power on projector

If not already connected, connect the female side of the power cord with the power input socket of
the projector. For more details see section dedicated to the power cord installation.

Description

Plug the 3-prong plug of power cord into a grounded AC outlet. The projector will go to

READY

mode. During

this stage the system boots and performs the internal check of the boards. The Power

On/Off button

will

BLINKING WHITE until

READY

mode is achieved. Once in

READY

mode, the

Power On/Off

button will be lit

WHITE.

4.4.3 Going from READY to ON

Description

Press the

Power On/Off

button on the projector, or the

Power On

button on the remote control. The projector

will power

. The

Power On/Off

button will BLINK BLUE during the transition from

READY

. Once the

projector is on, the

Power On/Off

button will be lit BLUE.

4.4.4 Going from ON to READY

Description

Press and hold the

Power on/off

button on the projector for 4 seconds, or press the

Power Off

button on the

remote control. The projector will power down through a cool down phase. The

Power on/off

button will BLINK

WHITE during the transition from

READY

. Once the projector is in

READY

, the

Power on/off

button will

be lit WHITE.

Getting started

Summary of Contents for Loki

































































































































Search results

Summary of Contents for Loki

Reviews:

Brands by name

Popular brands

Barco Loki, Installation Manual

Search results

Summary of Contents for Loki

Reviews:

Brands by name

Popular brands