![background image](http://html1.mh-extra.com/html/barco/iosono-one-series/iosono-one-series_installation-and-user-manual_3882298029.webp)
6. Use Cases
Image 6-2
Audio tab with active Noise sequence in Setup page of Play Con
fi
g
To play back the noise sequence
1. Go to the
Audio
Tab on the setup page (wrench symbol).
2. Press
Activate
in
Noise Sequence
- the output level meters in the
Status page
(
i
symbol) indicate output level on a single
channel. Connected loudspeakers should play back the noise signal accordingly.
3. Control the noise sequence with
-
Activate -
for start and stop.
-
Loop Playback
- button for an automated sequence to all speakers respectively.
-
Forward
and
Backward
buttons to step through individual output channels.
While the noise sequence is activated, all other control elements except for the main volume controls are
deactivated.
6.4
Create And Play A Clip List
About
One of the main features of the IOSONO ONE is processing clip lists.
To create a clip list
1. Connect to the IOSONO ONE and enter
Play Con
fi
g
2. Go to the setup page (wrench symbol) and the
Clip Lists
tab
3. Press
New
to create a new clip list - rename it (per default Cliplist0)
4. Press
+
to add clips to the clip list
5. Deselect the
Setup
button to return to the main page
Play a clip list
1. Select a clip list - press the
Cue
button the clips of the selected clip list are shown in the show window
R5906747 IOSONO ONE 16/05/2017
25
Summary of Contents for IOSONO ONE Series
