Barco Iosono Core R9801500, Installation And User Manual

Page: 56 / 65

8. Advanced System Tuning With The System Tuning Extension
- The software will ask the user to put the microphones to the next set of positions and go on with the measurement
- Click OK
4. Once the measurement is fi nished, you can access the impulse response for every loudspeaker measured at every microphone
position
-
Go to the loudspeaker setup display in the Measurement tab
- Select the desired speaker by left click
- Hold the Ctrl and left-click onto the desired Microphone -Icon
- Right-click onto the desired Loudspeaker -Icon
- Select Show Impulse Response
Note: You can use this feature to check the measurements for general correctness and analyzing phase issues.
Image 8-4
Measurement summary
8.4 Filter Creation
About
Tuning fi lters will be designed and applied in the second tab of the System Tuning Extension , named Filter Creation . Before you
can start with the fi lter design the previously measured data has to be loaded correctly.
To create a fi lter
1. In the list right to the graph you can de-/select loudspeaker groups in column A (for Active). Only selected loudspeaker groups
will be displayed in the graph on the left and incorporated in the fi lter processing and assignment. The fi lter of each speaker
group will be processed to the Filter Kit assigned in the column next to the loudspeaker groups. Select a Filter Creation Kit ,
for example Speaker Default.
Note: In Filter Creation Kit you can add a kit with + and given names. In Kit Name you can select added or default fi lter kits. A
fi lter kit contains all settings and parameter used to process the fi lters.
52 R5906746 IOSONO CORE 08/05/2017