74
ImagePRO-II • User’s Guide
4. Menu Orientation
Creating Custom Formats
Figure 4-53.
Custom Formats Menu
To select a format, use the
ADJUST
knob to scroll through the list. Then press
SEL
.
`êÉ~íáåÖ=çê=bÇáíáåÖ=~=cçêã~í
To create or edit an input or output format, use the following procedure:
1.
With the navigation cursor on the second line of the
Custom
Formats Menu
,
press
SEL
. The navigation cursor changes to an edit cursor.
2.
Scroll through the list to the format you want to edit. Press
SEL
again. The format
is displayed on the screen and the navigation cursor reappears at the left.
3.
Scroll to the first value you want to set. The options are:
H Total
V Active
H Active
V Front Porch
H Front Porch
V Sync
H Sync
V Rate (Hz)
V Total
Interlaced
Horizontal
values are measured in pixels.
Vertical
values are measured in lines.
The range for any single Horizontal or Vertical value is determined in part by the
values of the other parameters. Changing one value does not change the other
values, but it limits the available range for other values.
For both Horizontal and Vertical values:
Total
=
Front Porch
+
Sync Width
+
Back Porch
+
Active
CUSTOM FORMATS
>
NTSC (480i)
Save As
>>
Delete
>>
H Total
858
H Active
720
H Front Porch
16
H Sync
64
H Rate (KHz)
31.25
V Total
525
V Active
487
V Front Porch
3
V Sync
3
V Rate (Hz)
59.94
Interlaced
Off
Note
H Rate (KHz)
is displayed for informational purposes. It is not
adjustable.