62
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
•
For
HD-15 Sync
, the available options are:
~
CVBS / YC / SOG/Y / CSync
~
+ H + V
~
+ H - V
~
- H + V
~
- H - V
The default setting for
HD-15 Sync
is
SOG/Y
for most formats. For NTSC and
PAL, the default setting is
CSync
with equalizations on.
•
For the
HD-15 SOG/Y
option, the options are:
~
Standard
~
Tri-level
~
Not available (n/a), if HD-15 Sync is anything other than SOG/Y
pÉííáåÖ=íÜÉ=paf=qóéÉ
The ImagePRO-II supports single-link SDI video, and can support dual-link SDI with the
3D/Dual Channel mezzanine installed. The system supports SD, HD, and 3G SDI (Levels A
and B).
To view or change SDI settings, select
Output >
SDI Type.
The
SDI Type Submenu
,
shown in the following figure, appears.
Figure 4-37.
SDI Type Submenu
On this menu:
•
SDI Link
displays the type of SDI link, either
Single
or
Dual
.
Dual
is only
available as an option if the 3D/Dual Channel mezzanine is installed and the
system mode is set to
Dual2K
.
•
SDI Type
settings include
SD
,
HD
,
3G Level A
or
3G Level B
. This field provides
only those options that are compatible with the output format for the connector.
For example, if the output format is 1080p@24,
SD
is not an available option.
Similarly, the
3G Level A
and
3G Level B
options are only available if the output
format supports updating from one level to another; otherwise, the available level
is displayed.
The
SDI 2 Type
line is only available as an option with the 3D/Dual Channel
mezzanine installed.
S D I T Y P E
> S D I L i n k
D u a l
S D I 1 T y p e
H D
S D I 2 T y p e
H D