ImagePRO-II • User’s Guide
61
4. Menu Orientation
Configuring Outputs
•
V Position
— Adjusts (in lines) the offset of the start of the output active area from
V sync.
•
V Active
— Adjusts (in lines) the vertical size of the output active area.
•
V Sync
— Adjusts (in lines) the V sync width.
rëáåÖ=`çãéLpJsáÇÉç=^Çàìëí
By selecting
Comp/S-Vid Adjust
from the
Output Menu,
you can adjust the output
encoder, which produces composite and S-Video outputs. The following illustration shows
the
Comp/S-Vid Adjust Submenu
.
Figure 4-35.
The Comp/S-Video Adjust Submenu
On this menu, there are two options,
HD-15 Pedestal
and
Comp Pedestal
.These options
enable or disable the 7.5 IRE pedestal on NTSC composite output. These options are not
available for PAL video.
The Pedestal settings are either
On
or
Off
. The default setting is
On
for NTSC video.
pÉííáåÖ=lìíéìí=póåÅ
The
Output
Sync Settings Submenu
lets you specify the sync types for selected outputs.
Access this menu by selecting
Sync Settings
from the
Output Menu
.
Figure 4-36.
Output Sync Settings Submenu
•
For
DVI Sync
,
HDMI Sync
, and
DP Sync,
the available options are:
~
+H+V
~
+H-V
~
-H+V
~
-H-V
The default setting for
DVI Sync
,
HDMI Sync
, and
DP Sync
is
+H+V
.
COMP/S-VID ADJ
> HD-15 Pedestal
Off
Comp Pedestal
Off
Note
These options apply only to outputs that support composite
and S-Video formats.
OUT SYNC SETTINGS
> DVI Sync
+H+V
HDMI Sync
+H+V
DP Sync
+H+V
HD-15 Sync
SOG /Y
HD-15 SOG/Y
Tri-level
