Barco ILite, Installation Manual

Page: 14 / 110

2. Installation requirements
2.1 Installation requirements for the ILite rental display
Weight
Do not underestimate the weight of a complete ILite rental display. Be sure that the floor or truss installation on which the ILite rental
display has to be installed is capable of handling five (5) times the complete load of the display. Note that one ILite rental tile weights
approximately 15 kg (or 75 kg per square meter display). Do not forget to take into account the weight of the ballast required in case
of a base stand ILite rental display.
Leveled surface
The surface on which an ILite rental display has to be installed must be leveled. Never install an ILite rental display on an inclined
surface.
Ballast
Depending on the height of the display and the position of the LED-wall upon the foot beams (somewhere between front and middle)
additional weight (ballast) will be required. Consult chapter “Ballast values”, or use the “Ballast calculator” tool available on Barco’s
secured web site to calculate the minimum ballast you require for safe installation of your ILite rental display.
10 R5976189 ILITE RENTAL DISPLAY 16/09/2005