Barco ILite 6, Service Manual

Page: 8 / 82

1. Safety
1.1 Servicing safety instructions
W
ARNING
:
Servicing must be done by authorized and quali fi ed technical personnel only, which are thor-
oughly familiar with the product and all of the proper safety checks of this product.
Personal protection
W
ARNING
:
Ensure you understand and follow all the safety guidelines, safety instructions, warnings and
cautions mentioned in this manual.
W
ARNING
:
Be aware of suspended loads.
W
ARNING
:
Wear a hard hat to reduce the risk of personal injury.
W
ARNING
:
Be careful while working with heavy loads.
W
ARNING
:
Mind your fi ngers while working with heavy loads.
Safety precautions:
• Follow all servicing and safety instructions mentioned in the servicing procedures.
• Unplug the tile AC power cord from the AC power source and wait about 10 minutes before start any servicing to the tile. This
to allow the capacitors to discharge.
• Some boards contains electrostatically sensitive devices (ESD). Take the necessary precautions to prevent the incidence of
component damage caused by static electricity.
• Do not modify and/or replicate any component. Barco uses speci fi c materials and manufacturing processes in order to achieve
part strength. No other parts then Barco parts are allowed.
Additional on-site servicing safety precautions:
• Fence off a restricted area of at least 3 meters around the LED-wall using an eye-catching fence and “KEEP OUT” signs. This
to prevent unauthorized persons coming near the LED-wall during servicing.
• Inspect the complete LED-wall for security, wear, deformation, corrosion, and any other circumstances that may effect the load
handling capability of the part.
• Do not modify and/or replicate any component. Barco uses speci fi c materials and manufacturing processes in order to achieve
part strength. No other parts than Barco parts are allowed.
• Both hands must be free for servicing ILite 6/8/10/12 tiles in a LED-wall. Therefore the use of a ladder to access a tile is
forbidden. Only the use of a scaffold or a Z-lift is allowed.
• Do not use the stacker system of the LED-wall to climb into the ILite 6/8/10/12 display. Always use a scaffold or Z-lift to perform
any servicing or repairing to the display.
4 R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007