![background image](http://html1.mh-extra.com/html/barco/iex-series/iex-series_installation-and-user-manual_3851379070.webp)
R5915190 /01
IEX series
70
Image 7
–
2
Back maintenance steps
1. Use a screw driver to remove 4 bolts which fixed the back cover.
Image 7
–
3
2. Pull out the connecting cable of the back cover and remove the back cover.
Image 7
–
4
3. To remove the module from the back in an inclined manner.
Image 7
–
5
7.2.2 Replacement of Power Supply
How to replace
When replacing the power supply, cut off the power supply to ensure your personal safety and equipment
safety. When installing a new power supply, pay attention to the order of the power cables to prevent short
circuits.
Replace a power supply of the LED display based on the following steps:
Summary of Contents for IEX Series
