![background image](http://html1.mh-extra.com/html/barco/iex-series/iex-series_installation-and-user-manual_3851379039.webp)
39
R5915190 /01
IEX series
Click
Save to Hardware
to save the current settings so that these settings are retained even if there is a
power failure.
4.4 Software Control Setting
4.4.1 Setting Coefficients for a New Module
How to set
1.
First set the window to be greater than or equal to the actual screen pixel size.
Image 4
–
26 Screen size and count
2.
In the main window, click Control
→
By Point Calibration
→
Brightness Calibration.
Image 4
–
27 Main window - Control
The
Brightness calibration
interface opens.
3.
Click
Get Screen Information
→
Read
.
Summary of Contents for IEX Series
