Barco IEX Series, Installation & User Manual

Page: 33 / 80

33 R5915190 /01 IEX series
Image 4 – 13 Manage coefficients
Upload coefficients : Upload the correction coefficient database generated by the software or read back by
the display screen to the screen.
Save coefficients to database : Read back and save the coefficients from the screen to the coefficient
database.
Set coefficients for a new scan board : After replacing the scan board (receiving card), set the correction
coefficients for the new receiving card.
Set coefficients for a new module : After replacing a module, set the correction coefficients for the new
module.
Adjust Coefficients (Color is uniform on screen) : Adjust the correction coefficients for a selected area on
the screen to achieve a satisfactory effect.
Erase or reload Coefficients: Erase or reload the correction coefficients for a selected area on the LED
display.
Reset Correction Coefficients : Reset the calibration coefficients on whole or selected section of LED
display.
4.3.5 Setting Coefficients for a New Receiving Card
How to set
1. Select Topology or List .
Image 4 – 14 Selecting area for new receiving card
LED Display Control Setting