![background image](http://html1.mh-extra.com/html/barco/id-r600/id-r600_owners-manual_4182365063.webp)
6. Advanced
The Dynacolor™ Interface
Following parameters are available in the Dyancolor™ Interface:
Measured Values
These are the colors the projector displays when no color changes are made
Red x, y
Coördinates for the Red point
Green x, y
Coördinates for the Green point
Blue x, y
Coördinates for the Blue point
White x, y
Coördinates for the White point
Red L
Red Light output
Green L
Green Light output
Blue L
Blue Light output
White L
White Light Output
Desired Values
These are the colors you want the projector to display when the status is enabled
Red x, y
Coördinates for the Red point
Green x, y
Coördinates for the Green point
Blue x, y
Coördinates for the Blue point
Cyan x, y
Coördinates for the Cyan point
Yellow x, y
Coördinates for the Yellow point
Magenta x, y
Coördinates for the Magenta point
White x, y
Coördinates for the White point
Red g
Red Light Gain
Green g
Green Light Gain
Blue g
Blue Light Gain
Cyan g
Cyan Light Gain
Yellow g
Yellow Light Gain
Magenta g
Magenta Light Gain
White g
White Light Gain
Status
Enables or disables Dynacolor™
Factory Preset
Sets the measured parameters back to the factory preset for the current set
Basic Dynacolor™ Adjustment
We assume we have a basic setup with 2 projectors, the Dynacolor™ adjustment is done by using only the Dynacolor™ menu:
1. Enable Dynacolor™ on both projectors.
2. Assume the first projector has the following measured values. (image 6-47)
3. Assume the second projector has the following measured values. (image 6-48)
4. We start by setting both projectors to the common red coordinate.
Tip:
Draw a quick sketch of both gamuts as a graphical help. (image 6-49)
5. Display the internal color bar pattern on both projectors.
6. In the desired values, adjust the red coordinate to a common value for both projectors.
Tip:
The color bar of the adjusted coordinate will no longer be displayed in case the coordinate is not present within the gamut
of the adjusted projector e.g. with the desired values for red set to x=660 and y= 318. (image 6-50)
R5976874 ID PRO R600/R600+ 21/09/2006
57
Summary of Contents for iD R600+
