![background image](http://html1.mh-extra.com/html/barco/id-lr-6-r9010342/id-lr-6-r9010342_user-manual_4181077087.webp)
6. Advanced
Image 6-76
7. Press
ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
The
Random
mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the
Random
mode.
The switching effects are only possible in the full screen mode
When the source switching mode is the fade in/out mode, the audio (when available) switching will also be
done using a fade in/out effect.
6.6.2
Background
Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the
background
settings.
How to change the background ?
1. Press
MENU
to activate the Toolbar
2. Press
→
to select the
Signal
item
3. Press
↓
to Pull down the
Signal
menu
4. Use
↑
or
↓
to select
Background
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select the desired background
Image 6-77
R59770134 ID LR-6 27/05/2011
83
Summary of Contents for iD LR-6 R9010342
