![background image](http://html1.mh-extra.com/html/barco/id-lr-6-r9010342/id-lr-6-r9010342_user-manual_4181077034.webp)
4. Setup
4.5
Projector address
What can be done ?
The projector is shipped with projector address set to ”0”
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors (inde-
pendently).
In the OSD menu
Projector Address
, the following addresses can be programmed :
•
Projector address: address de
fi
ned by the user, may be from 0 to 255
0-9 is used for RCU communication, 0–255 being used for RS232 serial communication.
•
Common address : address may be 0 or 1
How to change the projector’s RC5 address ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Installation
3. Press
↓
to Pull down the
Installation
menu
4. Use
↑
or
↓
to select
Projector address
Image 4-5
5. Press
ENTER
A dialog box appears on the screen.
Image 4-6
Image 4-7
Entering the new projector address ?
1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Installation
3. Press
↓
to Pull down the
Installation
menu
4. Use
↑
or
↓
to select
Projector address
5. Press
ENTER
30
R59770134 ID LR-6 27/05/2011
Summary of Contents for iD LR-6 R9010342
