![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134101.webp)
7. Mechanical spares and servicing procedures
Image 7-35
Screws fixing the DMD fan (behind the lens holder, next to the LPS)
4. Remove the DMD fan
7.3.8
Replacing the PMP fan
Necessary tools
screwdriver Torx T10
How to remove the PMP fan?
1. Unplug the connector of the fan (J7 on the fan connector board)
2. Remove the 2 screws fixing the PMP fan
Image 7-36
Screws fixing the PMP fan
3. Remove the PMP fan
7.3.9
Temperature sensors
Ambient temperature sensor
The ambient temperature records the ambient temperature in the projector. Its feedback signal is used to control the fan speeds. It
is located on the bottom of the projector, underneath the formatter board.
R59770097 ID H250 / H500 15/05/2007
97
Summary of Contents for iD H250
