![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_owners-manual_4180871031.webp)
5. Setup
5.2
Terminology overview
Overview
The following table gives an overview of the keys.
Image 5-2
1
Function keys
user programmable keys with functions for direct access.
2
MENU
Menu key, to enter or exit the Toolbar menu.
3
Address key
(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4
LOGO key
allows to recall the stored Logo (not in PiP mode)
5
PAUSE
to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6
STBY
standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to
go to standby, press the standby key for 2 seconds.
7
MUTE
to interrupt the sound reproduction (audio = optional.
8
AUTOIMAGE
Auto image, to center the image on the active LCD surface.
9
Digit buttons
direct input selection.
9b
SOURCE button
this button allows to switch through the active (scanned) inputs
R59770079 BARCO ID H250/500 23/07/2007
27
Summary of Contents for iD H250
