![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_owners-manual_4180871013.webp)
3. Installation
Image 3-3
Note:
In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
3.3
Removing the lens
How to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector
Image 3-4
Image 3-5
location of the lens handle
2. Remove the lens out of its housing
C
AUTION
:
Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
3.4
Lens range
Overview table
Lens
Partnumber
QCLD (0.85:1)
R9849860
QCLD (1.1-1.3:1)
R9849850
CLD (1.2-1.6:1)
R9849870
R59770079 BARCO ID H250/500 23/07/2007
9
Summary of Contents for iD H250
