Barco ICP-D, Installation Manual

Page: 8 / 54

R5912083 /01 ICP-D 8
1.1 Safety
Notice on safety
This equipment is built in accordance with the requirements of the applicable international safety standards.
These safety standards impose important requirements on the use of safety critical components, materials
and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and
having access to live parts. Safety standards also impose limits to the internal and external temperature rises,
radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of
fire. Simulated single fault condition testing ensures the safety of the equipment to the user even when the
equipment's normal operation fails.
User definition
Throughout this manual, the term SERVICE PERSONNEL refers to persons having appropriate technical
training and experience necessary to be knowledgeable of potential hazards to which they are exposed
(including, but not limited to HIGH VOLTAGE ELECTRIC and ELECTRONIC CIRCUITRY and HIGH
BRIGHTNESS PROJECTORS) in performing a task, and of measures to minimize the potential risk to
themselves or other persons. The term USER and OPERATOR refers to any person other than SERVICE
PERSONNEL, AUTHORIZED to operate professional projection systems located.
Important safety instructions
Read this chapter attentively. It contains important information to prevent personal injury while installing the
ICP-D in a Barco digital projector. Furthermore, it includes several cautions to prevent damage to the ICP-D.
Ensure that you understand and follow all safety guidelines, safety instructions and warnings mentioned in this
chapter before installing the ICP-D. After this chapter, additional
“ warnings ” and “ cautions ” are given
depending on the installation procedure. Read and follow these “ warnings ” and “ cautions ” as well.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Only trained and authorized technicians may install the ICP-D.
• Install and use the ICP-D exclusively on a Barco digital projector mentioned in the list “ Where to use ”
( “ General ” , page 7).
• Installation of the ICP-D must be done in a dust free area.
• Only use attachments/accessories specified by the manufacturer.
• CAUTION: Troubleshooting must be performed by a trained technician. To reduce the risk of electrical
shock, do not attempt to service this equipment unless you are qualified to do so.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, or the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• FRAGILE: The ICP-D is fragile. Handle the ICP-D with care at all times.
• Always switch off the projector and unplug the power cord before removing one of the covers, unless
otherwise stated.
• Always wear a wrist band which is connected to the ground while handling the ESD sensitive parts.
• Wear insulating gloves during the execution of the installation and maintenance actions to avoid short-
circuit.
• Switch off the projector and unplug the power cord from the UPS INLET for removal of all power from the
projector (not applicable for DP2K S series).
• Be careful never to drop anything into the ICP-D assembly during the procedure. The fall of a tool or a
spare part in the ICP-D or in the projector could have catastrophic consequences when you will restart the
system.
• Be careful to always follow strict procedures during maintenance operations (Battery replacement,
assembly replacement).
• Save the original shipping carton and packing material. They will come in handy if you ever have to ship
your equipment. For maximum protection, repack your set as it was originally packed at the factory.
• Rated maximum ambient temperature, t
a
= 35°C (95°F).
• Danger of explosion if battery is incorrectly installed.
• Replace battery only with the same or equivalent type recommended by the manufacturer.
General