Barco ICP-D, Installation Manual

Page: 15 / 54

15 R5912083 /01 ICP-D
2.2 Input & communication
ICP-D communication and input ports
1 1 2
Image 2 – 1
1 HDMI A
HDMI 2.0 connector to connect a video source.
2 HDMI B
HDMI 2.0 connector to connect a video source.
ICP-D status LEDs and Reset button
LEDs on ICP-D front panel give information on the status of the device.
3 1 5 1 4
Image 2 – 2
3 Reset button
This button allows to reboot ICP-D.
4
Ready LED
This LED in conjunction with the Power/Error LED indicates the status of the device (see status overview
table below)
5 Power/Error LED
This LED in conjunction with the Ready LED indicates the status of the device (see status overview table
below)
Status overview PWR/ERROR and READY LEDs:
PWR/ERROR READY ICP-D Status
Off Off Turned off
Red Off Board reset or security error
Blinking Green Off Boot loader
Blinking Green Blinking Orange Operating System start up
Blinking Green Orange Security Manager - Image Integrity tests
Blinking Green Blinking Yellow Security Manager - Self Test
Green Blinking Green Starting Applications
Green Green Applications started in normal mode
Green Orange Applications started in degraded mode
Blinking Red Off Security error
ICP-D functionality