Barco iCon H600, Owner'S Manual

Page: 112 / 171

8. Advanced
8.6.4 Auto Image
What can be done ?
AutoImage creates the best suited image file for the connected source.
It calculates/measures several source parameters :
• Total pixels per line
• Start pixel
• Phase
• Contrast/Brightness levels
Auto Image works only for data images.
The measure of the total number of pixels per line can be done through 2 methods
• Limited scan: a windowing system is used to allow fast tracking.
The operation takes about 20 seconds (depending on file)
• Full scan: tracking is done over the full range.
The operation takes about 1.5 minutes (depending on file)
How to launch Auto Image?
1. Press MENU to activate the Tool bar
2. Press → to select the
Image files
item
3. Press ↓ to Pull down the
Image files
menu
4. Use ↑ or ↓ to select
Auto Image
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired file scan method
Image 8-60
7. Press ENTER
AutoImage acts on the active window. The image in the window may move and change in aspect during the
AutoImage process.
Auto Image can also be launched via the RCU with the dedicated AutoImage key.
106 R5976821 BARCO ICON 15/03/2007