Barco iCon H250, Installation Manual

Page: 8 / 15

2. Hard disk recovery procedure
Image 2-2 Image 2-3
6. Put the CD-ROM
Hard Disk Recovery Data
in the USB DVD reader device
7. Navigate to the tab
Exit
8. Select
Exit Saving Changes
Image 2-4
2.2 Defining commands
How to define the commands?
1. At the boot prompt, type the following text:
fb1024 docache doeject
Image 2-5
Warning: You only have a limited amount of time to enter this command! If you exceed this time, type
shutdown —r now
and restart the procedure!
Note: The keyboard layout at this moment is QWERTY
6 R59770070 ICON H250 / ICON H400 31/01/2007