Barco HDX series User And Installation Manual Download Page 33

Page: 33 / 340

3. Physical installation

Image 3-23
Lens calculator

The Lens Calculator can also be used to determine the position of the projector when the lens type and screen
width is known.

3.2.3

Lens installation

How to install

1. Remove the foam rubber in the opening of the lens holder if not removed yet.

2. Take the lens assembly out of its packing material and remove the lens caps on both sides.

3. Place the lens holder in the “unlocked” position by moving the lens lock handle (A) towards the lens power supply socket (B) as

illustrated.

Image 3-24
Lens installation, preparation

4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).

Note:

The lens holder is placed default in the On-Axis position at factory.

5. Gently insert the lens in such a way that the lens connector matches the socket (B).

R5905032 HDX SERIES 20/11/2014

Summary of Contents for HDX series





















































































































































































































































































































































Search results

Summary of Contents for HDX series

Reviews:

Related manuals for HDX series

Brands by name

Popular brands

Barco HDX series, User And Installation Manual

Search results

Summary of Contents for HDX series

Reviews:

Related manuals for HDX series

Brands by name

Popular brands