Barco HDX series, User And Installation Manual

Page: 104 / 340

8. Input
Image 8-70
3D second source
2. Press ENTER to select.
The Source selection window opens.
3. Use the ▲ or ▼ key to select the desired input and press ENTER ..
Image 8-71
Second source, select input
8.9.6 L-R Synchronisation, fi eld dominance
About fi eld dominance
The Field dominance setting has only effect in the 3D mode: Frame sequential - Single channel (in all other modes this setting is
grayed out). Furthermore, the input frequency must be equal or lower than 100 Hz (50 Hz per eye). In case the input frequency is
higher than 100 Hz (50 Hz per eye, 59.94 & 60 Hz in practice), the “Field dominance” setting has no effect.
For the lower input frequencies (40 Hz or lower/eye), triple fl ash is used and for frequencies between 40 and 51 Hz/eye double
fl ashing is introduced and the coupling between the video input signal and the 3D SYNC IN signal must be determined.
This setting is stored per input.
How to activate
1. Press Menu to activate the menus and select Alignment → 3D Glasses → L/R Synchronisation .
Image 8-72
Main window Image 8-73
Input, 3D
100 R5905032 HDX SERIES 20/11/2014