Barco HDX series Installation Manual Download Page 145

Page: 145 / 351

9. Image

9.6.4

Delete a

What can be done ?

A custom image

le can be deleted. Be aware that an active

le can’t be deleted.

How to delete

1. Press

Menu

to activate the menus and select

Image

→

Image File Services

→

Delete

Image 9-60
Main menu, Image

Image 9-61
Image, image

le services

Image 9-62
Image

le services, delete

2. Press

ENTER

to select.

The available custom

les are displayed.

If no custom

les are available, a message that no custom

les are available is displayed.

3. Use the

▲

▼

key to select the

le to delete.

Image 9-63
Delete custom

4. Press

ENTER

to delete the selected

le.

No recovery possible !

R5905032 HDX SERIES 01/06/2011

141

Summary of Contents for HDX series
































































































































































































































































































































































Search results

Summary of Contents for HDX series

Reviews:

Brands by name

Popular brands

Barco HDX series, Installation Manual

Search results

Summary of Contents for HDX series

Reviews:

Brands by name

Popular brands