Barco HDX 4K User Manual Download Page 74

Page: 74 / 107

11. GUI – System Settings

11.1.2 Wired IP address set up

How to manually set up the IP address

1. In the main menu, select

System Settings

→

Communication

→

Wired

2. In the

Wired

menu, select

LAN

Image 11-1
Wired menu, LAN

The LAN menu is displayed

Image 11-2
LAN menu

3. In the LAN menu, make sure that

Automatic

is disabled.

4. Use the

▲

▼

key to select

Address

and press

ENTER

to activate the input box.

5. Use the

▲

▼

key to change the selected character.

Use the

◄

►

key to select another character.

Note:

Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

6. Repeat steps 4 and 5 for the Subnet and Default Gateway.

7. Click

APPLY

to con

rm all changes.

11.2 Themes

How to select a different interface theme

1. In the main menu, select

System Settings

→

Themes

Image 11-3
System Settings Menu — Themes.

2. In the themes menu, select the desired

Theme

You can choose one of the following:

Light

, or

Dark

R5906070 HDX 4K 23/09/2016

Summary of Contents for HDX 4K












































































































Search results

Summary of Contents for HDX 4K

Reviews:

Related manuals for HDX 4K

Brands by name

Popular brands

Barco HDX 4K, User Manual

Search results

Summary of Contents for HDX 4K

Reviews:

Related manuals for HDX 4K

Brands by name

Popular brands