![background image](http://html.mh-extra.com/html/barco/hdq-2k40/hdq-2k40_user-manual_474158280.webp)
14. Projector Control
14.16.2 Request for information
Request for information
Via an SMS message sent from any cell phone to the GSM number associated with the projector, projector information can be re-
quested. The receiving projector analyses the message. The projector answers with an SMS of maximum 140 characters containing
the projector type, name and serial number, projector and lamp run time, lamp and projector status.
How to request
1. Create a new SMS message containing 2 parts
-
activation code (created in Projector Toolset), 4 digits
-
action string INFO.
separated by a space character.
Example : “1234 INFO”
Activation code can be generated with Projector Toolset. See Projector Toolset’s user guide, chapter “
Communication
”, “
Mobile
settings
”.
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and creates a return SMS.
This message is sent back to the requested cell phone.
14.16.3 Lamp ignition admission
What can be done?
Via an SMS message sent from any cell phone to the GSM number associated with the projector, lamp ignition admission can be
enabled or disabled. When enabled, the user can start up the projector in a normal way. When disabled, the lamp of the projector
cannot start up. A failed message “
Lamp Ignition permitted
” will be displayed.
How to request
1. Create a new SMS message containing 3 parts
-
activation code (created in Projector Toolset), 4 digits
-
action string LAMP.
-
action argument (ENABLE or DISABLE)
separated by a space character.
Example : “1234 LAMP DISABLE”
Activation code can be generated with Projector Toolset. See Projector Toolset’s user guide, chapter “
Communication
”, “
Mobile
settings
”.
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and execute the command. It creates a return SMS with the following message:
“
Lamp ignition enable
” or “
Lamp ignition disabled
” or “
Lamp ignition admission failed
”.
This message is sent back to the requested cell phone.
276
R5905303 HDQ 2K40 02/03/2015
Summary of Contents for HDQ--2K40
