Barco HDF-W30LP, User And Installation Manual

Page: 271 / 311

19. Service
Image 19-37
Save custom settings, question
19.9 Auto Dimming when over-temperature
What can happen?
When an over-temperature is detected, the projector starts dimming the light source so that the projector can cool down.
How to activate - deactivate
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Service → Auto Dimming when
Overtemperature .
2. Press ENTER to toggle between [On] and [Off] .
[On] : Dimming is started when an over-temperature is detected.
[Off] : No dimming is started when over-temperature is detected.
19.10 Time and Date
How to set
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Service → Time and Date .
Image 19-38
Date and time set up Image 19-39
Date and time set up
2. Use the ▲ or ▼ key to select Hour , Minute , Day , Month or Year and press ENTER to select.
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
4. Press ENTER to accept the changes.
Repeat for other values in the same way.
R5906730 HDF WLP SERIES 01/08/2017 267