Barco HDF-W30LP, User And Installation Manual

Page: 255 / 311

18. Projector Control
The GSM number must be entered with the following mask +##XXXYYYYYY
+ is mandatory before starting with the country code.
## = country code, 1, 2 or 3 digits
XXX = operator number length depends on the country (do not enter the 0)
YYYYYY = phone number
The + must be followed by at least 7 digits (operator phone number > 7)
4. Press ENTER to accept the phone number.
The software checks if the + is entered and that at least 7 digits are entered. When it is not a valid number, the number fi
eld next
to the selected subscriber remain blank.
This procedure can be repeated for subscriber 2 and 3.
5. Select OK and press ENTER to con fi gure the subscription.
How to unsubscribe via the OSD menu
1. Press Menu to activate the menus and select Projector Control → GSM con fi guration → Sms subscriptions .
Image 18-75
SMS subscription
Image 18-76
Subscriber 1
2. Press ENTER to open the Edit mode. Clear the current number and press ENTER again.
3. Select OK and press ENTER to con fi gure the software.
Subscribe or Unsubscribe via SMS
1. Create a new SMS message containing 2 parts:
- activation code (created in Projector Toolset)
- action string
separated by a space character.
Example :
to subscribe : “1234 SUBSCRIBE”
to unsubscribe : “1234 UNSUBSCRIBE”
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and add or remove the GSM number associated with the message.
A result message is sent back to the requested cell phone.
18.16 SMS services
Projector must be equipped with the optional GSM module.
Overview
• Request for noti fi cations
• Request for information
• Lamp ignition admission
R5906730 HDF WLP SERIES 01/08/2017 251