Barco HDF-W30LP, User And Installation Manual

Page: 253 / 311

18. Projector Control
On Scheduler will execute the tasks in the list.
A schedule symbol is added at the left bottom corner of the local LCD panel ( .)
Off No tasks are executed
18.14 GSM Con fi guration, activation
Only possible when a GSM module with SIM card is installed in the projector.
What can be done ?
To con fi gure the projector software with the installed SIM card, a correct PIN code (4digits) must be entered.
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to insert the SIM
card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to con fi gure
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → GSM
con fi guration → GSM pincode .
Image 18-66
GSM con
fi guration
Image 18-67
GSM pincode
2. Select Pin code and press ENTER .
A PIN code input fi eld appears.
Image 18-68
Device con
fi guration, PIN code
3. Enter the 4 digit PIN code corresponding with the mounted SIM card. Use the digit keys on the remote control or the local keypad.
Each digit is replaced by an asterisks.
Press
ENTER when the 4 digits are entered.
Image 18-69
PIN code entered
4. Select OK and press ENTER to con fi gure the software.
R5906730 HDF WLP SERIES 01/08/2017 249