Barco HDF-W30LP, User And Installation Manual

Page: 247 / 311

18. Projector Control
18.11 Local LCD
What is possible ?
The back light of the local LCD can be adapted to the needs of the environment.
A time out for the local LCD can be set. If there is nothing done on the local LCD, it can go out after a time out.
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → Local LCD .
The Local LCD menu is displayed.
2. Use the ▲ or ▼ key to select Back Light .
Image 18-50
Local LCD, back light
3. Use the ◄ or ► key to change the back lighting of the local LCD panel.
4. Use the ▲ or ▼ key to select Time out .
Image 18-51
Local LCD, time out
5. Press ENTER to toggle between [Off], [10], [30], [60] or [120].
[Off] : LCD panel remains always on.
a value : LCD shut down in x seconds.
18.12 Language selection
What can be done?
The user can change the language of the on screen menus and the local display menus to one of the available languages.
The following languages are available:
•
English
• French
• German
• Spanish
• Portuguese
• Japanese
• Chinese
• Korean
• Dutch
All available languages are indicated in the language of the country. The current active language is indicated by checked radio
button.
How to change the language
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → Change
Language .
R5906730 HDF WLP SERIES 01/08/2017 243