![background image](http://html1.mh-extra.com/html/barco/hdf-w30lp/hdf-w30lp_user-and-installation-manual_4170176221.webp)
17. Alignment
Image 17-96
3D sync loop through
4. Press
ENTER
to toggle between
[On]
and
[Off]
.
[On] : 3D SYNC OUT is directly routed from 3D SYNC IN
[Off] : the internal 3D sync signal is available on 3D SYNC OUT, native or inverted as indicated in the ‘Invert 3D Sync Out’ setting.
17.13.4 Upper limit for triple or double
fl
ash
What can be done?
The Upper limit for triple
fl
ash can be set. When the input frame rates are below this limit, the result will be displayed at triple frame
rate.
The Upper limit for double
fl
ash can be set. When the input frame rates are below this limit, the result will be displayed at double
frame rate.
How to set the limit
1. Press
Menu
on the remote control (RCU) or on the local keypad to activate the menus and select
Alignment
→
3D Glasses
.
The
3D Glasses
menu is displayed .
2. Press
ENTER
.
3. Use the
▲
or
▼
key to select
Upper Limit for Triple Flash
or Upper
Limit for Double Flash
.
Image 17-97
4. Press
ENTER
to toggle to another value.
For Triple
fl
ash the limit can set to
24
,
25
or
30
.
For Double
fl
ash the limit can set to
30
,
48
or
50
.
17.14 High End Systems Mirror
About the mirror
The digital mirror is DMX controlled. This control can be done via the projector or via Projector Toolset. External DMX control is still
possible. Almost any image can be displayed on almost any place in the room using the pan and tilt adjustments. Settings storing
per layout is possible.
Projector control activation
1. Press
Menu
on the remote control (RCU) or on the local keypad to activate the menus and select
Alignment
→
High End Systems
Mirror
.
R5906730 HDF WLP SERIES 01/08/2017
217
Summary of Contents for HDF-W30LP
